Doss 2 in 1 LAN Tester and Multimeter Combo - DM100

This Doss 2 in 1 LAN Tester and Multimeter Combo is the one tool you need to measure all types of electrical connections. This 2 in 1 LAN tester & multimeter is a innovative device that allows the user easy to measure DC/AC Voltage/Current, Resistance, Continuity, diode and verify the cable continuity, open/short, cross-connect. The included remote terminator allows the user to test installed cable either at a wall jack or a patch panel adding up mto value and convenience. Proper use and care of this meter will provide years of reliable service.

The LAN Tester is very practical, capable of reading correct pin configurations of 10 Base-T Cable (Category 5), 10 Base -2 Cable (coax), RJ45/RJ11 Modular cables, 356A, TIA-568A/568B and Token ring cables by comparing one transmitting end to the corresponding receiving end. With the remote kit is can test cables installed far away either on wall plates or path panels.

Find more Electronics , Gadgets and Other Gadgets

• Doss 2 in 1 LAN Tester and Multimeter Combo
• Measures: DC/AC Voltage, DC/AC Current, Resistance, Continuity, Diode Forward Voltage, LAN Cable Tester
• 3-1/2 Digit (2000 Count) LCD Display for Multimeter Functions
  
• LED Displays Actual Pin Configuration Of: 10BASE-T and 10BASE-02 Thin Ethernet, FJ45/RJ11, 258A, TIA-568a/568b
  Token Ring Cables
• Double Molded Housing
  
• CAT111 600V / CAT11 1000V
  
• Provides Easy to Read Continuity and Fault Status Display
  
• Checks for Continuity, Open Wire, Grounded Wire, Shorted Pair and Crossed Pair Faults
  
• Allows for Remote Testing of Installed Cables from Wall Jack or Patch Panel
  
• Auto or Manual Scanning for LAN Tester
  
• Autoranging with Auto Power off for Multimeter Functions
• Carry Pouch Included